Die Community PC-Techniker Portal IoT
Allgemeines Computer Forum => Overclocking => Thema gestartet von: Andreas am April 28, 2005, 20:10:53
-
Hallo,
ich habe mir mal die Zeit genommen um einen kleinen Tualatin zusammenzubauen und ein bischen zu übertakten.
Daten:
Motherboard : ASUS TUWE-M
Chipsatz: i810E2
Prozessor : Celeron 1300 @ 1733 bei 1,5 Standrad Corespannung
Stepping: SL6C7
Der Prozessor hat dank 0,13 µm noch eine Menge Potential. Intel hat diesen Prozessor nur nicht mehr mit höheren Taktraten angeboten, da er locker dem P4 Konkurrenz macht. Meiner läuft im Moment bei 1733 Mhz Primestable. Leider kann ich nicht höher gehen, da mein Board das nicht mehr mitmacht. Da der Multiplikator ja bekanntlich bei Intel fest verdrahtet ist, besteht nur die Möglichkeit den FSB von 100 Mhz uaf 133 Mhz anzuheben.
Der Prozessor bleibt selbst unter schwerem Load bei angenehmen 39 °C und zieht insgesamt ca 38 Watt.
Pentium M verdächtige Werte :-) ... Naja der Pentium M bekannt unter der Baugruppe Centrino ist ja auch ein aufgebohrter P3.
Intel Celeron 1300@1733 Mhz
benchmarking utility, written by intel_hasser
Version C 1.1.8.10
Timer Resolution: 1739448199 Hz
Compiled for Intel P2
dhrystone 2 benchmark:
VAX rating: 2053.5895 VAX MIPS
dhrystone rating: 3608.1568 kilo dhrystone/s
integer mandelbrot benchmark:
calculated area (-0.300,0.450)-(0.300,1.050) every 0.015 with maxdepth of 255
result: 502.9636 it/s
integer result: 3422.2585 MOPS (million operations per second)
data throughput: 12433.6335 MB/s (register/cache/ram - only data)
whetstone benchmark:
result: 1334.4535 MWIPS
floatpoint mandelbrot benchmark:
calculated area (-0.300,0.450)-(0.300,1.050) every 0.015 with maxdepth of 255
result: 508.0270 it/s
float result: 976.8810 MOPS (million operations per second)
data throughput: 10220.8605 MB/s (register/cache/ram - only data)
memory bandwith benchmark:
measurement 1
blksize int32 read int32 write int64 read int64 write float64 read float64 write
1 kB 3363.1 MB/s 4529.2 MB/s 6608.1 MB/s 5162.4 MB/s 6138.1 MB/s 5568.3 MB/s
4 kB 3873.1 MB/s 4188.6 MB/s 6558.1 MB/s 5182.2 MB/s 6296.7 MB/s 5821.6 MB/s
8 kB 4016.4 MB/s 4202.6 MB/s 6596.2 MB/s 5212.0 MB/s 6403.5 MB/s 5899.8 MB/s
16 kB 4085.0 MB/s 4205.5 MB/s 6486.9 MB/s 5224.1 MB/s 6299.6 MB/s 5862.9 MB/s
24 kB 4016.7 MB/s 4200.8 MB/s 3787.0 MB/s 4077.7 MB/s 3766.2 MB/s 4344.2 MB/s
32 kB 4031.7 MB/s 4202.3 MB/s 3788.2 MB/s 4078.9 MB/s 3768.2 MB/s 4276.0 MB/s
48 kB 4046.5 MB/s 4204.1 MB/s 3789.5 MB/s 4080.4 MB/s 3770.6 MB/s 4209.9 MB/s
64 kB 4053.9 MB/s 4204.6 MB/s 3789.7 MB/s 4081.0 MB/s 3771.3 MB/s 4177.2 MB/s
96 kB 4061.0 MB/s 4205.6 MB/s 3790.5 MB/s 4081.9 MB/s 3772.6 MB/s 4145.6 MB/s
128 kB 4064.6 MB/s 4205.7 MB/s 3790.5 MB/s 4082.1 MB/s 3772.9 MB/s 4129.5 MB/s
192 kB 4067.6 MB/s 4207.0 MB/s 3791.7 MB/s 4083.5 MB/s 3774.3 MB/s 4115.0 MB/s
256 kB 3778.4 MB/s 4057.2 MB/s 3446.7 MB/s 4464.2 MB/s 3406.8 MB/s 3980.2 MB/s
384 kB 544.2 MB/s 256.3 MB/s 514.5 MB/s 309.4 MB/s 507.8 MB/s 310.7 MB/s
512 kB 541.5 MB/s 195.3 MB/s 509.7 MB/s 228.9 MB/s 505.3 MB/s 228.9 MB/s
768 kB 541.2 MB/s 172.9 MB/s 512.8 MB/s 191.1 MB/s 507.0 MB/s 190.9 MB/s
1024 kB 540.1 MB/s 167.6 MB/s 510.8 MB/s 178.9 MB/s 504.6 MB/s 178.8 MB/s
1536 kB 547.8 MB/s 168.9 MB/s 519.9 MB/s 174.2 MB/s 511.8 MB/s 174.3 MB/s
2048 kB 537.3 MB/s 166.2 MB/s 511.2 MB/s 169.2 MB/s 504.8 MB/s 168.9 MB/s
3072 kB 545.7 MB/s 168.9 MB/s 519.9 MB/s 169.1 MB/s 513.1 MB/s 169.1 MB/s
4096 kB 539.0 MB/s 166.1 MB/s 510.8 MB/s 166.1 MB/s 503.1 MB/s 166.2 MB/s
measurement 2
datasize COPY ADD SCALE TRIAD
float64 208.5 MB/s 230.4 MB/s 210.3 MB/s 229.2 MB/s
int32 207.0 MB/s 227.5 MB/s 201.6 MB/s 225.5 MB/s
int64 207.1 MB/s 241.0 MB/s 185.3 MB/s 217.5 MB/s
average speed
memory read: 2852.0945 MB/s
memory write: 2759.8455 MB/s
memory operation: 215.9025 MB/s
average memory speed: 1942.6141 MB/s
bubble sort memory benchmark:
sorting random list with 655360 32bit entries
result: 124.9396 it/s
integer result: 573.1619 MOPS (million operations per second)
data throughput: 2811.1394 MB/s (register/cache/ram - only data)
integer matrix benchmark:
using 14x14 32bit integer matrices
rating: 402.4531 it/s
prime filtering benchmark (M3):
searching all primes up to 20000000
primes found: 1270607
result: 1.2464 it/s
integer result: 386.4227 MOPS (million operations per second)
data throughput: 2363.3532 MB/s (register/cache/ram - only data)
prime filtering benchmark (M4):
searching all primes up to 20000000
primes found: 1270607
result: 1.1641 it/s
integer result: 272.9009 MOPS (million operations per second)
data throughput: 1716.6902 MB/s (register/cache/ram - only data)
prime filtering benchmark (M6):
searching all primes up to 20000000
primes found: 1270607
result: 1.3682 it/s
integer result: 576.9637 MOPS (million operations per second)
data throughput: 2869.4130 MB/s (register/cache/ram - only data)
floatpoint matrix benchmark:
using 14x14 32bit integer matrices
rating: 96.6893 it/s
image operation benchmark:
image size of 1024x1024
rating: 93.9375
integer result: 492.6960 MOPS (million operations per second)
float result: 985.0065 MOPS (million operations per second)
data throughput: 7892.5913 MB/s (register/cache/ram - only data)
Rating:
Rel. Rating (Calc/Mem, Cache/Mem): 1.98/0.50 1.52/0.66
Abs. Rating (Int, Float, Mem): 35.26 62.90 24.73
Category Rating (Office, MMedia): 32.76 37.76
Overall Rating (Average): 35.51
Vergleichswerte eines Pentium 4 1800Mhz
benchmarking utility, written by intel_hasser
Version C 1.1.8.9
Timer Resolution: 1794759339 Hz
Compiled for Intel P4 (Rev 2)
dhrystone 2 benchmark:
VAX rating: 1569.8126 VAX MIPS
dhrystone rating: 2758.1607 kilo dhrystone/s
integer mandelbrot benchmark:
calculated area (-0.300,0.450)-(0.300,1.050) every 0.015 with maxdepth of 255
result: 257.5162 it/s
integer result: 1752.1881 MOPS (million operations per second)
data throughput: 6365.9904 MB/s (register/cache/ram - only data)
whetstone benchmark:
result: 654.0100 MWIPS
floatpoint mandelbrot benchmark:
calculated area (-0.300,0.450)-(0.300,1.050) every 0.015 with maxdepth of 255
result: 386.2866 it/s
float result: 742.7873 MOPS (million operations per second)
data throughput: 7771.5974 MB/s (register/cache/ram - only data)
memory bandwith benchmark:
measurement 1
blksize int32 read int32 write int64 read int64 write float64 read float64 write
1 kB 2081.5 MB/s 4424.9 MB/s 6809.0 MB/s 3547.0 MB/s 6077.7 MB/s 3217.4 MB/s
4 kB 5645.1 MB/s 4410.0 MB/s 6829.4 MB/s 3608.2 MB/s 6216.0 MB/s 3403.7 MB/s
8 kB 7489.0 MB/s 4434.1 MB/s 6664.9 MB/s 3611.5 MB/s 6339.1 MB/s 3475.4 MB/s
16 kB 6120.5 MB/s 4420.7 MB/s 4740.7 MB/s 3629.0 MB/s 4647.7 MB/s 3516.5 MB/s
24 kB 6464.4 MB/s 4420.6 MB/s 4749.8 MB/s 3636.6 MB/s 4665.0 MB/s 3527.4 MB/s
32 kB 6653.8 MB/s 4428.9 MB/s 4750.2 MB/s 3636.4 MB/s 4665.3 MB/s 3538.2 MB/s
48 kB 6846.1 MB/s 4427.9 MB/s 4747.2 MB/s 3642.3 MB/s 4683.1 MB/s 3542.9 MB/s
64 kB 6958.8 MB/s 4425.3 MB/s 4753.4 MB/s 3639.2 MB/s 4687.6 MB/s 3542.6 MB/s
96 kB 7062.4 MB/s 4432.2 MB/s 4750.7 MB/s 3648.5 MB/s 4691.2 MB/s 3550.4 MB/s
128 kB 7113.4 MB/s 4429.8 MB/s 4748.8 MB/s 3647.3 MB/s 4692.1 MB/s 3551.2 MB/s
192 kB 7157.2 MB/s 4431.7 MB/s 4750.4 MB/s 3650.2 MB/s 4692.3 MB/s 3554.8 MB/s
256 kB 7124.6 MB/s 4490.0 MB/s 4662.1 MB/s 3556.9 MB/s 4609.2 MB/s 3486.2 MB/s
384 kB 6978.5 MB/s 4494.6 MB/s 4655.5 MB/s 3562.0 MB/s 4555.3 MB/s 3489.6 MB/s
512 kB 6004.6 MB/s 4225.3 MB/s 4230.3 MB/s 3404.4 MB/s 4181.8 MB/s 3287.6 MB/s
768 kB 1631.6 MB/s 950.8 MB/s 1417.5 MB/s 951.0 MB/s 1420.2 MB/s 950.1 MB/s
1024 kB 1630.3 MB/s 980.6 MB/s 1419.4 MB/s 981.3 MB/s 1418.2 MB/s 980.1 MB/s
1536 kB 1636.7 MB/s 989.9 MB/s 1423.5 MB/s 988.7 MB/s 1423.9 MB/s 988.9 MB/s
2048 kB 1629.9 MB/s 985.2 MB/s 1419.3 MB/s 984.7 MB/s 1419.8 MB/s 984.9 MB/s
3072 kB 1637.0 MB/s 982.2 MB/s 1426.0 MB/s 983.1 MB/s 1424.9 MB/s 982.7 MB/s
4096 kB 1628.3 MB/s 980.0 MB/s 1418.9 MB/s 979.5 MB/s 1418.0 MB/s 979.3 MB/s
measurement 2
datasize COPY ADD SCALE TRIAD
float64 1312.7 MB/s 1411.3 MB/s 1365.0 MB/s 1482.8 MB/s
int32 1230.9 MB/s 816.4 MB/s 1283.6 MB/s 850.3 MB/s
int64 1241.6 MB/s 578.2 MB/s 656.8 MB/s 526.4 MB/s
average speed
memory read: 4296.4824 MB/s
memory write: 2976.7012 MB/s
memory operation: 1062.9877 MB/s
average memory speed: 2778.7236 MB/s
bubble sort memory benchmark:
sorting random list with 655360 32bit entries
result: 521.9945 it/s
integer result: 2394.6570 MOPS (million operations per second)
data throughput: 11744.8739 MB/s (register/cache/ram - only data)
integer matrix benchmark:
using 14x14 32bit integer matrices
rating: 317.3799 it/s
prime filtering benchmark (M3):
searching all primes up to 20000000
primes found: 1270607
result: 2.6590 it/s
integer result: 824.3625 MOPS (million operations per second)
data throughput: 5041.7836 MB/s (register/cache/ram - only data)
prime filtering benchmark (M4):
searching all primes up to 20000000
primes found: 1270607
result: 1.7003 it/s
integer result: 398.6053 MOPS (million operations per second)
data throughput: 2507.4372 MB/s (register/cache/ram - only data)
prime filtering benchmark (M6):
searching all primes up to 20000000
primes found: 1270607
result: 2.3223 it/s
integer result: 979.2614 MOPS (million operations per second)
data throughput: 4870.1601 MB/s (register/cache/ram - only data)
floatpoint matrix benchmark:
using 14x14 32bit integer matrices
rating: 258.5085 it/s
image operation benchmark:
image size of 1024x1024
rating: 72.3465
integer result: 379.4526 MOPS (million operations per second)
float result: 758.6083 MOPS (million operations per second)
data throughput: 6078.5239 MB/s (register/cache/ram - only data)
Rating:
Rel. Rating (Calc/Mem, Cache/Mem): 1.15/0.87 1.21/0.82
Abs. Rating (Int, Float, Mem): 29.56 47.25 33.41
Category Rating (Office, MMedia): 33.26 36.99
Overall Rating (Average): 35.31
-----------------------------------------
Text informations of old database:
CPUName: Intel P4 Northwood
MemName: 512MB Rambus RIMM
Cache1 : 8
Cache2 : 512
Cache3 : 0
BenchN : C 1.1.8.9 P4
-----------------------------------------
-
Hallo Andreas,
ich habe auch mir einen kleinen PC mit Tualatin zusammengebaut (für Reserve) aber kann ich denn nicht zu übertakten db. bis 110Mhz geht wenn ich mehr gebe, kann ich nicht den PC anschalten, ich weis nicht wo liegt das Problem kannst du mir ein Rat geben? Ich habe Board ASUS P3B-F 1,3GHz Tualatin mit Upgradeadapter. Ich meine dass liegt bei dem Board oder? Ich kann ein von den zwei bekommen ASUS CUBX oder TUSL2-C. Ich habe mich für denn CUBX entschieden Grund: besseres Chipsatz (BX das war der beste oder?) Habe ich gute Wahl getroffen? oder muss ich mir ein anderes suchen? welches kannst du mir vorschlagen?
(1300@1733 Mhz geht vielleicht mehr?) Und den CPU Lüfter, reich den originales oder muss ich welches extra kaufen?
Gruß
Julia
-
Also ich bin zumindest mit meinem Board an der Grenze ... Problem ist, dass ich auf meinem Board die Standardspannung nicht erhöhen kann, der Prozessor läuft im Moment bei dieser Taktfrequenz mit der Standardspannung.
Es gab Boards mit dem BX Chipsatz, die offiziell nur bis 100 Mhz FSB gingen ... Ich weiß jetzt nicht ob das P3B-F dazugehört..... Jedenfalls vermute ich, dass entweder dein PCI oder AGP Bus ebenfalls über Standardtakt laufne und somit der PC den Dienst versagt.
Das TUSL2-C ist schon mal eine sehr gute Wahl ...
-
Hallo Andreas,
Db. dass wenn ich den TUSL2 einbaue wird mein Computer stabil laufen (1300@1733 Mhz)? Wie meinst du kann ich denn originales Intel CPU Lüfter lassen?
Gruß
Julia
-
Das kann pauschal nie sagen, da Ocen immer eine Glückssache ist ... Da spielen viele Faktoren eine Rolle ... Qualität der Die, Stabilität der verschiedenen Spannungen usw ... Das mußt du selbst herausfinden, dafür gibt keine Regeln ....
-
@Andreas
Ich habe gerade in Internet gelesen, dass ABIT BX133 sehr gutes Borad zu übetakten ist. Jetzt weiß ich nicht ABIT BX133 RAID? oder ASUS TUSL2-C?. Kannst du mir deine Meinung sagen?
Gruß
Julia
-
Das Abit kenne ich jetzt nicht ... Wird auch gut sein .... Ich würde mir jedoch das ASUS holen ...
-
@ Andreas
Weist du vielleicht ob zwischen ASUS TUWE-M und ASUS TUSL2-C unterschiede gibst.
Sind das nur die PCI Slots (verschiedene zahl). Für antwort werde ich sehr dankbar
:hail :hail :hail :hail
gruß
Julia
-
Der wesentliche Unterschied ist, dass du bei dem TUSL2-C die Vcore Spannung verändern kannst. Und das hat den "neueren" Chipsatz 815EB drauf. Das andere mußte über Asus vergleichen habe ich auch nicht im Kopf ...
-
Hab gerade versucht den Vdroop-Mod auf dem Gigabyte G33M durchzuf?hren. Jedoch sind die Bauteile zu klein, um gen?gend Graphit auftragen zu k?nnen. Wollte es jetzt mal mit vorsichtigem Betupfen mit Silberleitlack probieren. Die Frage ist nur: wo bekomm ich SLL her??
_______
=== XRumer 5.0 Palladium (http://www.botmasternet.com) RULEZ! ===
-
Hallo,
ich würde die Finger vom Silberleitlack lassen, wenn du zu viel nimmst kann es sein das du den Widerstand auf 0 setzt (Kurzschluss)!
Und das kann mit unter die Hardware zerstören!
Ich habe dafür immer einen HB-Bleistift genommen, und nur ein paar mal drüber und vorsichtig rangetastet (ca. 1MOhm)!
Und die restlichen Bauteile mit Tesa abgeklebt! Das lose Graphit ausblasen!
Es hat bei mir min. 4 Monate gehalten, ohne dass die Spannung gefallen ist!
Gruß Jürgen
-
Silberleitlack bekommst du im Elektroladen. Mit Bleistift ist aber leichter zu mahlen. Silberleitlack würd ich eher für Platinen nehmen (auch super für Laptops mit kaputten Tasten).
Der Thread ist zwar schon Tausend Jahre alt, aber die Cellerons mit Copermine Kern sind nicht nur overclocking Tauglich sondern auch wunderbar passiv Kühlbar. Eine sehr günstige alternative fürs Home-Mediacenter, bei dem Preis heutzutage zu teuren VIA Eden Boards. Auch der TDP wehr liegt nur ein paar Watt höher und würde sich mit den Kosten sicherlich über Jahrzehnte tragen.
-
von wann isn der cpu ich kenne dn garnicht?